View our Spotlight Media for detailed information on today's featured product. Like the rest of the Roland media line, Spotlight Media products deliver exceptional results you can rely on.
This premium-quality one-sided 16 oz. scrim banner vinyl is specially treated for flame retardance. It has a high tensile strength and tear resistance, and is perfect for a variety of applications both indoors and out. It is dimensionally stable and can be hemmed and grommeted for a superb finished look. Large banners displayed outdoors should be tested for wind resistance depending on the required durability and longevity of the application.
This premium-quality two-sided blockout 20 oz. scrim banner vinyl has a very smooth surface for superior printing on either side. It can be hemmed and grommeted, and the high tenacity polyester base cloth make it extremely dimensionally stable for a wide variety of indoor and outdoor applications. Optimal heater setting is 40-50° C (104-122° F).
This single-sided 13 oz. uncoated scrim banner vinyl is a great all-purpose, low-cost banner alternative for a variety of indoor and outdoor applications. It is very flexible and has a great white point, and can be hemmed and grommeted to finish.
This high-quality transparent 3 mil adhesive-back vinyl has a fairly optically clear adhesive and is designed for many types of graphic applications. It images nicely in a variety of print modes and the adhesive is aggressive enough to adhere to a variety of substrates. While not conformable to rivets and irregular curves or indentations, it is durable both laminated and unlaminated, although lamination is recommended for protection against abrasion and chemical deterioration.
This high-quality 3 mil matte adhesive-back vinyl is designed for many types of graphic applications. It images nicely in a variety of print modes and has a permanent adhesive for a variety of applications. While not conformable to rivets and irregular curves or indentations, it is durable both laminated and unlaminated, although lamination is recommended for protection against abrasion and chemical deterioration. Optimal heater setting is 40-50° C (104-122° F).
This high-quality 3 mil glossy adhesive-back vinyl is designed for many types of graphic applications. It images nicely in a variety of print modes and has a permanent adhesive for a variety of applications. While not conformable to rivets and irregular curves or indentations (ie do not use for vehicle wraps), it is durable both laminated and unlaminated, although lamination is recommended for protection against abrasion and chemical deterioration.
This perforated 7 mil adhesive-back vinyl is designed for window graphics that require one-way view capability, including vehicle window graphics. While the product images well, care should be taken to avoid over-saturation as ink wells in the holes. The hole configuration is 60/40, and the removable adhesive is designed to remove cleanly after 1 year. While not conformable to rivets and irregular curves or indentations, it is durable both laminated and unlaminated, although lamination (with an optically clear overlaminate film) is recommended for protection against abrasion and chemical deterioration as well as to keep the holes clear for viewability.
This premium-quality 2 mil glossy cast uncoated vinyl has a special permanent removable adhesive that is as durable but easier to apply and remove than traditional permanent adhesives. It is extremely durable and conformable to rivets and irregular curves or indentations, but lamination is highly recommended for fleet applications or to protect images from abrasion and chemical deterioration.
This product is heavyweight, affordable and Piezo Certified. At a nice 150 gram weight, it is an excellent choice for color graphics applications including posters, trade show and board room graphics, point of purchase displays, and much more. High opacity and very good white point assure a high quality reproduction. When lamination or encapsulation is part of the application, this premium matte product can reduce your cost with very little change in image quality.
This 7.5 mil glossy paper was specially coated for solvent ink printing at a very attrractive price point. It has a good white point and gloss level for a wide variety of indoor graphic applications. A heat assist of 30-35° C (86-95° F) is helpful with this product, but care should be taken not to heat the paper too aggressively.
This new film is a hybrid of matte white film and traditional backlit film with an improved topcoat for indoor and outdoor durability. It is a heavy-weight 9 mil film designed to be front print and displayed either frontlit or backlit for a variety of display and trade show graphic applications. It mounts and laminates very well, and has excellent indoor and outdoor life with Roland pigment inks.
This medium weight cotton/polyester blend canvas offers an excellent white point and images well in a variety of print modes. It is designed to be dry to the touch immediately after printing, and offers exceptional water-resistant properties. Auto sheet cutting is not recommended with this media.
This garment transfer material is an opaque white media designed to be print and cut for heat transfer to light or dark garments, either cotton or cotton blend. Finished transfers offer terrific color with good handling, although longevity depends on the quality of the garment as well as post-transfer care.
